CB Scientific

TEST4 - 3 TEST4 CBD DETECTION

When sending your product to a lab isn't feasible or too extreme for your current situation, bring the lab to you with the Test4 CBD Detection Kit!

Growers in the field need to know their crop potency as soon as possible especially if growing selective breeds since an entire crop can test high thus it can't be sold as hemp in the US.

This kit takes away the long wait time for a potency lab result as well as providing a result at a far lower cost. We are in no way supporting the notion that you shouldn't get your product tested in an ISO certified lab, however, for the farmer, baker, processor, or enthusiast of cannabis, it makes complete sense to pick up a rapid cannabis detection kit.

The Kit allows you to detect CBD in oils, concentrates, dry or wet bud. This is important due to the vast state requirements for testing and there are still CBD companies today selling products without CBD.

This is how the kit works:

1. Get a cannabis sample around 0.05g or a small pinch.

2. Put the sample in one of the small clear vials Vial 2.

3. Use the solution from large vial 1. They are color-coded (purple for CBD detection). Add the solution to the small vial until almost completely filled.

4. Give the small vial a good shake and let it sit for 10 minutes, by then, compare the results to the respective card.

Works with:
1. cannabis buds
2. extracts and oils

Each detection kit is packed with three individual detections. You receive three CBD detections.

Detecting CBD is a simple process with the included color chart and instruction cards provided in every kit.

CB Scientific has been creating detection kits just like these for over half a decade to an international market. Every kit is manufactured here in the US where we believe that science paves the way for a better future.

All of these kits have been adapted from the old DL reagent which was used back in the 20th Century for criminal convictions. This test was found inaccurate since many compounds tested positive. CB Scientific has created a modified version of this detection called a beam test where a positive response for THC or CBD will create an easily distinguishable color for cannabis compounds such as THC and or CBD.

CBD AND THC DETECTION KIT - TEST4 COMBO KIT (Third Generation)

When sending your product to a lab isn't feasible or too extreme for your current situation, bring the lab to you with the Combo Detection Kit!

This kit takes away the long wait time for a potency lab result as well as providing a result at a far lower cost. We are in no way supporting the notion that you shouldn't get your product tested in an ISO certified lab, however, for the farmer, baker, processor, or enthusiast of cannabis, it makes complete sense to pick up a rapid cannabis detection kit.

The Combo Kit allows you to detect THC in edibles, concentrates, dry or wet bud, as well as CBD in concentrates, dry or wet bud, and various CBD products like vapes and tinctures. This is important due to the vast state requirements for testing and there are still CBD companies today selling either CBD products over the 0.3% THC threshold or selling fake CBD oil with no CBD.

This is how the kit works:

1. Get a cannabis sample around 0.05g or a small pinch.

2. Put the sample in one of the small clear vials (Vial B or 2 depending on THC or CBD detection respectively)

3. Use the solution from large vial (Vial A or 1 depending on THC or CBD detection respectively). They are color-coded (red for THC detection, purple for CBD detection). Add the solution to the small vial until almost completely filled.

4. Give the small vial a good shake and let it sit for 10 minutes, by then, compare the results to the respective card.

Works with:
1. cannabis buds
2. extracts and oils

Each detection kit is packed with six individual tests. You receive three THC detection and three CBD detection.

Detecting CBD and THC is a simple process with the included color chart and instruction cards provided in every kit.

CB Scientific has been creating detection kits just like these for over half a decade to an international market. Every kit is manufactured here in the US where we believe that science paves the way for a better future.

All of these kits have been adapted from the old DL reagent which was used back in the 20th Century for criminal convictions. This test was found inaccurate since many compounds tested positive. CB Scientific has created a modified version of this detection called a beam test where a positive response for THC or CBD will create an easily distinguishable color for cannabis compounds such as THC and or CBD.

THC AND EDIBLES DETECTION KIT - TEST4 THC/EDIBLE KIT - Third Generation

When sending your product to a lab isn't feasible or too extreme for your current situation, bring the lab to you with the Test4 THC/EDIBLE Detection Kit!

This kit takes away the long wait time for a potency lab result as well as providing a result at a far lower cost. We are in no way supporting the notion that you shouldn't get your product tested in an ISO certified lab, however, for the farmer, baker, processor, or enthusiast of cannabis, it makes complete sense to pick up a rapid cannabis detection kit.

The Kit allows you to detect THC in edibles, concentrates, dry or wet bud. This is important due to the vast state requirements for testing and there are still CBD companies today selling either CBD products over the 0.3% THC threshold or selling fake CBD oil with no CBD.

This is how the kit works:

1. Get a cannabis sample around 0.05g or a small pinch.

2. Put the sample in one of the small clear vials Vial B.

3. Use the solution from large vial A. They are color-coded (red for THC detection). Add the solution to the small vial until almost completely filled.

4. Give the small vial a good shake and let it sit for 10 minutes, by then, compare the results to the respective card.

Works with:
1. cannabis buds
2. extracts and oils

3. Edibles

Each detection kit is packed with three individual tests. You receive three THC detections.

Detecting THC is a simple process with the included color chart and instruction cards provided in every kit.

CB Scientific has been creating detection kits just like these for over half a decade to an international market. Every kit is manufactured here in the US where we believe that science paves the way for a better future.

All of these kits have been adapted from the old DL reagent which was used back in the 20th Century for criminal convictions. This test was found inaccurate since many compounds tested positive. CB Scientific has created a modified version of this detection called a beam test where a positive response for THC or CBD will create an easily distinguishable color for cannabis compounds such as THC and or CBD.

KIT - 3 TEST4 THC/EDIBLE  KITS

When sending your product to a lab isn't feasible or too extreme for your current situation, bring the lab to you with the Test4 Single THC/EDIBLE Detection Kit!

When three is too many and all you need is one detection, the single kit is the choice for you.

This kit takes away the long wait time for a potency lab result as well as providing a result at a far lower cost. We are in no way supporting the notion that you shouldn't get your product tested in an ISO certified lab, however, for the farmer, baker, processor, or enthusiast of cannabis, it makes complete sense to pick up a rapid cannabis detection kit.

The Kit allows you to detect THC in edibles, concentrates, dry or wet bud. This is important due to the vast state requirements for testing and there are still CBD companies today selling either CBD products over the 0.3% THC threshold or selling fake CBD oil with no CBD.

This is how the kit works:

1. Get a cannabis sample around 0.05g or a small pinch.

2. Put the sample in one of the small clear vials Vial B.

3. Use the solution from large vial A. They are color-coded (red for THC detection). Add the solution to the small vial until almost completely filled.

4. Give the small vial a good shake and let it sit for 10 minutes, by then, compare the results to the respective card.

Works with:
1. cannabis buds
2. extracts and oils

3. Edibles

Each detection kit is packed with one individual detection. You receive one THC detections.

Detecting THC is a simple process with the included color chart and instruction cards provided in every kit.

CB Scientific has been creating detection kits just like these for over half a decade to an international market. Every kit is manufactured here in the US where we believe that science paves the way for a better future.

All of these kits have been adapted from the old DL reagent which was used back in the 20th Century for criminal convictions. This test was found inaccurate since many compounds tested positive. CB Scientific has created a modified version of this detection called a beam test where a positive response for THC or CBD will create an easily distinguishable color for cannabis compounds such as THC and or CBD.

TEST4 - 3 TEST4 HEMP DETECTION KIT

When sending your product to a lab isn't feasible or too extreme for your current situation, bring the lab to you with the Test4 Single THC/EDIBLE Detection Kit!

Growers in the field need to know their crop potency as soon as possible especially if growing selective breeds since an entire crop can test high thus it can't be sold as hemp in the US.

This kit takes away the long wait time for a potency lab result as well as providing a result at a far lower cost. We are in no way supporting the notion that you shouldn't get your product tested in an ISO certified lab, however, for the farmer, baker, processor, or enthusiast of cannabis, it makes complete sense to pick up a rapid cannabis detection kit.

The Kit allows you to detect THC in edibles, concentrates, dry or wet bud. This is important due to the vast state requirements for testing and there are still CBD companies today selling either CBD products over the 0.3% THC threshold or selling fake CBD oil with no CBD.

This is how the kit works:

1. Get a cannabis sample around 0.05g or a small pinch.

2. Put the sample in one of the small clear vials Vial B.

3. Use the solution from large vial A. They are color-coded (red for THC detection). Add the solution to the small vial until almost completely filled.

4. Give the small vial a good shake and let it sit for 10 minutes, by then, compare the results to the respective card.

Works with:
1. cannabis buds
2. extracts and oils

3. Edibles

Each detection kit is packed with three individual detections. You receive three THC detections.

Detecting THC is a simple process with the included color chart and instruction cards provided in every kit.

CB Scientific has been creating detection kits just like these for over half a decade to an international market. Every kit is manufactured here in the US where we believe that science paves the way for a better future.

All of these kits have been adapted from the old DL reagent which was used back in the 20th Century for criminal convictions. This test was found inaccurate since many compounds tested positive. CB Scientific has created a modified version of this detection called a beam test where a positive response for THC or CBD will create an easily distinguishable color for cannabis compounds such as THC and or CBD.